Workflow map
256 candidate workflows. One code identifies an ordered sequence, including its completion and reporting obligations.
256 expressions
| ASCII / byte | Compact workflow | Prose expression |
|---|---|---|
| 000 ASCII NUL | Complete→report | Finish the assigned task, then report its outcome. |
| 001 ASCII SOH | Continue→complete→document→notify→receipt | Continue the current approach until the assigned work is complete, document the result, notify the system, and verify its delivery receipt without starting an acknowledgement chain. |
| 002 ASCII STX | Read→plan→execute→verify→report | Read the canonical task, plan the remaining work, execute within scope, verify the result, and report the evidence. |
| 003 ASCII ETX | Inspect→diagnose→correct→verify | Inspect the actual behavior, identify its cause, apply the authorized correction, and verify that the defect is resolved. |
| 004 ASCII EOT | Resume→reconcile→continue | Recover the latest checkpoint, reconcile subsequent changes, and continue the unfinished work. |
| 005 ASCII ENQ | Claim→execute→prove→close | Claim the assigned task, execute it, attach evidence satisfying its criteria, and close it only when those criteria are met. |
| 006 ASCII ACK | Prepare→check→deliver→readback | Prepare the authorized result, complete required checks, deliver it to the intended target, and read back its actual identity. |
| 007 ASCII BEL | Blocked→checkpoint→record→notify→wait | Preserve progress, record the concrete blocker and needed decision, notify through the authorized system, and wait only on the dependent work. |
| 008 ASCII BS | Stop→preserve→record | Stop the assigned activity safely, preserve recoverable work, and record the operator stop without resuming it. |
| 009 ASCII HT | Observe→measure→compare→report | Observe the actual work cycle, measure its relevant boundaries, compare like conditions, and report the evidence and limits. |
| 010 ASCII LF | Claim→independent check→verified event | Record the owner's completion claim, independently check its evidence, and publish a distinct verified event only if the check passes. |
| 011 ASCII VT | Send once→inspect receipt→reconcile | Send the authorized message once, inspect its system receipt, and reconcile uncertain delivery without blindly replaying it. |
| 012 ASCII FF | Compact→checkpoint→resume | Compact the current context, save the objective and next action with exact references, and resume without repeating completed work. |
| 013 ASCII CR | Newest request→record backlog→execute | Apply the latest operator steering first, preserve earlier requests in the backlog, and execute the current bounded priority. |
| 014 ASCII SO | Explore→measure→review | Explore the proposed idea, measure the relevant behavior, and bring the results back for review before adopting it. |
| 015 ASCII SI | Complete→document→handoff→verify receipt | Finish and document the assigned work, make the authorized handoff with its canonical references, and verify the machine delivery receipt. |
| 016 ASCII DLE | Bug fix: Inspect→prepare→execute→verify→report | Inspect the failing behavior and relevant source; prepare the smallest scoped correction; apply the scoped correction; then reproduce the original trigger and check that the defect is resolved, and report the result. |
| 017 ASCII DC1 | Bug fix: Inspect→diagnose→report | Inspect the failing behavior and relevant source, identify the cause of the observed problem with the reported defect, and report exact evidence without applying a change. |
| 018 ASCII DC2 | Bug fix: Read→compare→record | Read the authoritative requirements for the reported defect, compare them with actual evidence, and record concrete discrepancies. |
| 019 ASCII DC3 | Bug fix: Inspect→plan→review | Inspect the failing behavior and relevant source; then prepare the smallest scoped correction, and present the plan for review without executing the change. |
| 020 ASCII DC4 | Bug fix: Prepare→checkpoint→execute→verify | Prepare the smallest scoped correction, preserve a recoverable checkpoint of the affected state, apply the scoped correction, and then reproduce the original trigger and check that the defect is resolved. |
| 021 ASCII NAK | Bug fix: Execute→focused check→report | Apply the scoped correction, run the focused checks needed to reproduce the original trigger and check that the defect is resolved, and report evidence and remaining limits. |
| 022 ASCII SYN | Bug fix: Failure→trace→correct→recheck | For a failed step in the reported defect, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 023 ASCII ETB | Bug fix: Snapshot→execute→compare→report | Record the relevant state before the reported defect; apply the scoped correction; compare the resulting state with the intended outcome and report material differences. |
| 024 ASCII CAN | Bug fix: Blocker→checkpoint→notify→wait | If the reported defect is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 025 ASCII EM | Bug fix: Stop→preserve→record | On an operator stop affecting the reported defect, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 026 ASCII SUB | Bug fix: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the reported defect, reconcile current state, complete only the unfinished authorized steps, and reproduce the original trigger and check that the defect is resolved. |
| 027 ASCII ESC | Bug fix: Baseline→execute→measure→compare | Measure the relevant baseline for the reported defect, apply the scoped correction, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 028 ASCII FS | Bug fix: Claim→independent check→record | Record the completion claim for the reported defect, independently reproduce the original trigger and check that the defect is resolved, and record the verification outcome separately from the claim. |
| 029 ASCII GS | Bug fix: Finish→document→notify→receipt | Finish the authorized work on the reported defect, reproduce the original trigger and check that the defect is resolved, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 030 ASCII RS | Bug fix: Dependency→refresh→resume→verify | When the recorded dependency for the reported defect changes, refresh actual state and authorization, resume only if the hold is resolved, and reproduce the original trigger and check that the defect is resolved. |
| 031 ASCII US | Bug fix: Diff→boundary check→evidence→handoff | Review the final changes for the reported defect, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 032 ASCII SPACE | Feature: Inspect→prepare→execute→verify→report | Read the acceptance criteria and existing implementation; prepare the bounded implementation plan; implement the agreed feature; then check the feature against its acceptance criteria, and report the result. |
| 033 ASCII ! | Feature: Inspect→diagnose→report | Read the acceptance criteria and existing implementation, identify the cause of the observed problem with the agreed feature, and report exact evidence without applying a change. |
| 034 ASCII " | Feature: Read→compare→record | Read the authoritative requirements for the agreed feature, compare them with actual evidence, and record concrete discrepancies. |
| 035 ASCII # | Feature: Inspect→plan→review | Read the acceptance criteria and existing implementation; then prepare the bounded implementation plan, and present the plan for review without executing the change. |
| 036 ASCII $ | Feature: Prepare→checkpoint→execute→verify | Prepare the bounded implementation plan, preserve a recoverable checkpoint of the affected state, implement the agreed feature, and then check the feature against its acceptance criteria. |
| 037 ASCII % | Feature: Execute→focused check→report | Implement the agreed feature, run the focused checks needed to check the feature against its acceptance criteria, and report evidence and remaining limits. |
| 038 ASCII & | Feature: Failure→trace→correct→recheck | For a failed step in the agreed feature, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 039 ASCII ' | Feature: Snapshot→execute→compare→report | Record the relevant state before the agreed feature; implement the agreed feature; compare the resulting state with the intended outcome and report material differences. |
| 040 ASCII ( | Feature: Blocker→checkpoint→notify→wait | If the agreed feature is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 041 ASCII ) | Feature: Stop→preserve→record | On an operator stop affecting the agreed feature, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 042 ASCII * | Feature: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the agreed feature, reconcile current state, complete only the unfinished authorized steps, and check the feature against its acceptance criteria. |
| 043 ASCII + | Feature: Baseline→execute→measure→compare | Measure the relevant baseline for the agreed feature, implement the agreed feature, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 044 ASCII , | Feature: Claim→independent check→record | Record the completion claim for the agreed feature, independently check the feature against its acceptance criteria, and record the verification outcome separately from the claim. |
| 045 ASCII - | Feature: Finish→document→notify→receipt | Finish the authorized work on the agreed feature, check the feature against its acceptance criteria, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 046 ASCII . | Feature: Dependency→refresh→resume→verify | When the recorded dependency for the agreed feature changes, refresh actual state and authorization, resume only if the hold is resolved, and check the feature against its acceptance criteria. |
| 047 ASCII / | Feature: Diff→boundary check→evidence→handoff | Review the final changes for the agreed feature, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 048 ASCII 0 | Interface: Inspect→prepare→execute→verify→report | Inspect the existing design and affected interaction; prepare the interface change using established design tokens; apply the requested interface change; then check the interaction, accessibility, and relevant responsive layouts without inspecting images, and report the result. |
| 049 ASCII 1 | Interface: Inspect→diagnose→report | Inspect the existing design and affected interaction, identify the cause of the observed problem with the requested interface change, and report exact evidence without applying a change. |
| 050 ASCII 2 | Interface: Read→compare→record | Read the authoritative requirements for the requested interface change, compare them with actual evidence, and record concrete discrepancies. |
| 051 ASCII 3 | Interface: Inspect→plan→review | Inspect the existing design and affected interaction; then prepare the interface change using established design tokens, and present the plan for review without executing the change. |
| 052 ASCII 4 | Interface: Prepare→checkpoint→execute→verify | Prepare the interface change using established design tokens, preserve a recoverable checkpoint of the affected state, apply the requested interface change, and then check the interaction, accessibility, and relevant responsive layouts without inspecting images. |
| 053 ASCII 5 | Interface: Execute→focused check→report | Apply the requested interface change, run the focused checks needed to check the interaction, accessibility, and relevant responsive layouts without inspecting images, and report evidence and remaining limits. |
| 054 ASCII 6 | Interface: Failure→trace→correct→recheck | For a failed step in the requested interface change, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 055 ASCII 7 | Interface: Snapshot→execute→compare→report | Record the relevant state before the requested interface change; apply the requested interface change; compare the resulting state with the intended outcome and report material differences. |
| 056 ASCII 8 | Interface: Blocker→checkpoint→notify→wait | If the requested interface change is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 057 ASCII 9 | Interface: Stop→preserve→record | On an operator stop affecting the requested interface change, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 058 ASCII : | Interface: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the requested interface change, reconcile current state, complete only the unfinished authorized steps, and check the interaction, accessibility, and relevant responsive layouts without inspecting images. |
| 059 ASCII ; | Interface: Baseline→execute→measure→compare | Measure the relevant baseline for the requested interface change, apply the requested interface change, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 060 ASCII < | Interface: Claim→independent check→record | Record the completion claim for the requested interface change, independently check the interaction, accessibility, and relevant responsive layouts without inspecting images, and record the verification outcome separately from the claim. |
| 061 ASCII = | Interface: Finish→document→notify→receipt | Finish the authorized work on the requested interface change, check the interaction, accessibility, and relevant responsive layouts without inspecting images, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 062 ASCII > | Interface: Dependency→refresh→resume→verify | When the recorded dependency for the requested interface change changes, refresh actual state and authorization, resume only if the hold is resolved, and check the interaction, accessibility, and relevant responsive layouts without inspecting images. |
| 063 ASCII ? | Interface: Diff→boundary check→evidence→handoff | Review the final changes for the requested interface change, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 064 ASCII @ | iPad release: Inspect→prepare→execute→verify→report | Inspect the build source, target device, and release requirements; prepare the signed artifact and required recovery material; install through the normal data-preserving upgrade path; then read the installed build identity and verify normal launch, leaving visual acceptance to Jay, and report the result. |
| 065 ASCII A | iPad release: Inspect→diagnose→report | Inspect the build source, target device, and release requirements, identify the cause of the observed problem with the authorized iPad release, and report exact evidence without applying a change. |
| 066 ASCII B | iPad release: Read→compare→record | Read the authoritative requirements for the authorized iPad release, compare them with actual evidence, and record concrete discrepancies. |
| 067 ASCII C | iPad release: Inspect→plan→review | Inspect the build source, target device, and release requirements; then prepare the signed artifact and required recovery material, and present the plan for review without executing the change. |
| 068 ASCII D | iPad release: Prepare→checkpoint→execute→verify | Prepare the signed artifact and required recovery material, preserve a recoverable checkpoint of the affected state, install through the normal data-preserving upgrade path, and then read the installed build identity and verify normal launch, leaving visual acceptance to Jay. |
| 069 ASCII E | iPad release: Execute→focused check→report | Install through the normal data-preserving upgrade path, run the focused checks needed to read the installed build identity and verify normal launch, leaving visual acceptance to Jay, and report evidence and remaining limits. |
| 070 ASCII F | iPad release: Failure→trace→correct→recheck | For a failed step in the authorized iPad release, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 071 ASCII G | iPad release: Snapshot→execute→compare→report | Record the relevant state before the authorized iPad release; install through the normal data-preserving upgrade path; compare the resulting state with the intended outcome and report material differences. |
| 072 ASCII H | iPad release: Blocker→checkpoint→notify→wait | If the authorized iPad release is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 073 ASCII I | iPad release: Stop→preserve→record | On an operator stop affecting the authorized iPad release, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 074 ASCII J | iPad release: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the authorized iPad release, reconcile current state, complete only the unfinished authorized steps, and read the installed build identity and verify normal launch, leaving visual acceptance to Jay. |
| 075 ASCII K | iPad release: Baseline→execute→measure→compare | Measure the relevant baseline for the authorized iPad release, install through the normal data-preserving upgrade path, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 076 ASCII L | iPad release: Claim→independent check→record | Record the completion claim for the authorized iPad release, independently read the installed build identity and verify normal launch, leaving visual acceptance to Jay, and record the verification outcome separately from the claim. |
| 077 ASCII M | iPad release: Finish→document→notify→receipt | Finish the authorized work on the authorized iPad release, read the installed build identity and verify normal launch, leaving visual acceptance to Jay, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 078 ASCII N | iPad release: Dependency→refresh→resume→verify | When the recorded dependency for the authorized iPad release changes, refresh actual state and authorization, resume only if the hold is resolved, and read the installed build identity and verify normal launch, leaving visual acceptance to Jay. |
| 079 ASCII O | iPad release: Diff→boundary check→evidence→handoff | Review the final changes for the authorized iPad release, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 080 ASCII P | Database: Inspect→prepare→execute→verify→report | Read the authoritative schema, affected records, and current revision; prepare a bounded change preserving unrelated records; apply the authorized change with revision-conflict handling; then read back the authoritative record and check the intended invariants, and report the result. |
| 081 ASCII Q | Database: Inspect→diagnose→report | Read the authoritative schema, affected records, and current revision, identify the cause of the observed problem with the assigned database correction, and report exact evidence without applying a change. |
| 082 ASCII R | Database: Read→compare→record | Read the authoritative requirements for the assigned database correction, compare them with actual evidence, and record concrete discrepancies. |
| 083 ASCII S | Database: Inspect→plan→review | Read the authoritative schema, affected records, and current revision; then prepare a bounded change preserving unrelated records, and present the plan for review without executing the change. |
| 084 ASCII T | Database: Prepare→checkpoint→execute→verify | Prepare a bounded change preserving unrelated records, preserve a recoverable checkpoint of the affected state, apply the authorized change with revision-conflict handling, and then read back the authoritative record and check the intended invariants. |
| 085 ASCII U | Database: Execute→focused check→report | Apply the authorized change with revision-conflict handling, run the focused checks needed to read back the authoritative record and check the intended invariants, and report evidence and remaining limits. |
| 086 ASCII V | Database: Failure→trace→correct→recheck | For a failed step in the assigned database correction, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 087 ASCII W | Database: Snapshot→execute→compare→report | Record the relevant state before the assigned database correction; apply the authorized change with revision-conflict handling; compare the resulting state with the intended outcome and report material differences. |
| 088 ASCII X | Database: Blocker→checkpoint→notify→wait | If the assigned database correction is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 089 ASCII Y | Database: Stop→preserve→record | On an operator stop affecting the assigned database correction, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 090 ASCII Z | Database: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned database correction, reconcile current state, complete only the unfinished authorized steps, and read back the authoritative record and check the intended invariants. |
| 091 ASCII [ | Database: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned database correction, apply the authorized change with revision-conflict handling, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 092 ASCII \ | Database: Claim→independent check→record | Record the completion claim for the assigned database correction, independently read back the authoritative record and check the intended invariants, and record the verification outcome separately from the claim. |
| 093 ASCII ] | Database: Finish→document→notify→receipt | Finish the authorized work on the assigned database correction, read back the authoritative record and check the intended invariants, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 094 ASCII ^ | Database: Dependency→refresh→resume→verify | When the recorded dependency for the assigned database correction changes, refresh actual state and authorization, resume only if the hold is resolved, and read back the authoritative record and check the intended invariants. |
| 095 ASCII _ | Database: Diff→boundary check→evidence→handoff | Review the final changes for the assigned database correction, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 096 ASCII ` | Events: Inspect→prepare→execute→verify→report | Trace the event from source through persistence and delivery; prepare the scoped event-handling correction; implement the authorized event-handling correction; then check persistence, recipient delivery, and duplicate suppression, and report the result. |
| 097 ASCII a | Events: Inspect→diagnose→report | Trace the event from source through persistence and delivery, identify the cause of the observed problem with the assigned event delivery behavior, and report exact evidence without applying a change. |
| 098 ASCII b | Events: Read→compare→record | Read the authoritative requirements for the assigned event delivery behavior, compare them with actual evidence, and record concrete discrepancies. |
| 099 ASCII c | Events: Inspect→plan→review | Trace the event from source through persistence and delivery; then prepare the scoped event-handling correction, and present the plan for review without executing the change. |
| 100 ASCII d | Events: Prepare→checkpoint→execute→verify | Prepare the scoped event-handling correction, preserve a recoverable checkpoint of the affected state, implement the authorized event-handling correction, and then check persistence, recipient delivery, and duplicate suppression. |
| 101 ASCII e | Events: Execute→focused check→report | Implement the authorized event-handling correction, run the focused checks needed to check persistence, recipient delivery, and duplicate suppression, and report evidence and remaining limits. |
| 102 ASCII f | Events: Failure→trace→correct→recheck | For a failed step in the assigned event delivery behavior, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 103 ASCII g | Events: Snapshot→execute→compare→report | Record the relevant state before the assigned event delivery behavior; implement the authorized event-handling correction; compare the resulting state with the intended outcome and report material differences. |
| 104 ASCII h | Events: Blocker→checkpoint→notify→wait | If the assigned event delivery behavior is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 105 ASCII i | Events: Stop→preserve→record | On an operator stop affecting the assigned event delivery behavior, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 106 ASCII j | Events: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned event delivery behavior, reconcile current state, complete only the unfinished authorized steps, and check persistence, recipient delivery, and duplicate suppression. |
| 107 ASCII k | Events: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned event delivery behavior, implement the authorized event-handling correction, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 108 ASCII l | Events: Claim→independent check→record | Record the completion claim for the assigned event delivery behavior, independently check persistence, recipient delivery, and duplicate suppression, and record the verification outcome separately from the claim. |
| 109 ASCII m | Events: Finish→document→notify→receipt | Finish the authorized work on the assigned event delivery behavior, check persistence, recipient delivery, and duplicate suppression, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 110 ASCII n | Events: Dependency→refresh→resume→verify | When the recorded dependency for the assigned event delivery behavior changes, refresh actual state and authorization, resume only if the hold is resolved, and check persistence, recipient delivery, and duplicate suppression. |
| 111 ASCII o | Events: Diff→boundary check→evidence→handoff | Review the final changes for the assigned event delivery behavior, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 112 ASCII p | Relay: Inspect→prepare→execute→verify→report | Inspect the registered transport and exact recipient binding; prepare the authorized request with a stable identity; send the authorized request once through the relay; then inspect the system receipt and exact-session delivery evidence without automatic replay, and report the result. |
| 113 ASCII q | Relay: Inspect→diagnose→report | Inspect the registered transport and exact recipient binding, identify the cause of the observed problem with the assigned relay operation, and report exact evidence without applying a change. |
| 114 ASCII r | Relay: Read→compare→record | Read the authoritative requirements for the assigned relay operation, compare them with actual evidence, and record concrete discrepancies. |
| 115 ASCII s | Relay: Inspect→plan→review | Inspect the registered transport and exact recipient binding; then prepare the authorized request with a stable identity, and present the plan for review without executing the change. |
| 116 ASCII t | Relay: Prepare→checkpoint→execute→verify | Prepare the authorized request with a stable identity, preserve a recoverable checkpoint of the affected state, send the authorized request once through the relay, and then inspect the system receipt and exact-session delivery evidence without automatic replay. |
| 117 ASCII u | Relay: Execute→focused check→report | Send the authorized request once through the relay, run the focused checks needed to inspect the system receipt and exact-session delivery evidence without automatic replay, and report evidence and remaining limits. |
| 118 ASCII v | Relay: Failure→trace→correct→recheck | For a failed step in the assigned relay operation, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 119 ASCII w | Relay: Snapshot→execute→compare→report | Record the relevant state before the assigned relay operation; send the authorized request once through the relay; compare the resulting state with the intended outcome and report material differences. |
| 120 ASCII x | Relay: Blocker→checkpoint→notify→wait | If the assigned relay operation is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 121 ASCII y | Relay: Stop→preserve→record | On an operator stop affecting the assigned relay operation, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 122 ASCII z | Relay: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned relay operation, reconcile current state, complete only the unfinished authorized steps, and inspect the system receipt and exact-session delivery evidence without automatic replay. |
| 123 ASCII { | Relay: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned relay operation, send the authorized request once through the relay, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 124 ASCII | | Relay: Claim→independent check→record | Record the completion claim for the assigned relay operation, independently inspect the system receipt and exact-session delivery evidence without automatic replay, and record the verification outcome separately from the claim. |
| 125 ASCII } | Relay: Finish→document→notify→receipt | Finish the authorized work on the assigned relay operation, inspect the system receipt and exact-session delivery evidence without automatic replay, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 126 ASCII ~ | Relay: Dependency→refresh→resume→verify | When the recorded dependency for the assigned relay operation changes, refresh actual state and authorization, resume only if the hold is resolved, and inspect the system receipt and exact-session delivery evidence without automatic replay. |
| 127 ASCII DEL | Relay: Diff→boundary check→evidence→handoff | Review the final changes for the assigned relay operation, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 128 non-ASCII byte (character unassigned) | Model service: Inspect→prepare→execute→verify→report | Inspect the intended model artifacts and authorized service state; prepare the serving configuration within existing resource authorization; configure the model service only where current authorization permits; then verify model identity and an actual valid inference response, and report the result. |
| 129 non-ASCII byte (character unassigned) | Model service: Inspect→diagnose→report | Inspect the intended model artifacts and authorized service state, identify the cause of the observed problem with the assigned model service, and report exact evidence without applying a change. |
| 130 non-ASCII byte (character unassigned) | Model service: Read→compare→record | Read the authoritative requirements for the assigned model service, compare them with actual evidence, and record concrete discrepancies. |
| 131 non-ASCII byte (character unassigned) | Model service: Inspect→plan→review | Inspect the intended model artifacts and authorized service state; then prepare the serving configuration within existing resource authorization, and present the plan for review without executing the change. |
| 132 non-ASCII byte (character unassigned) | Model service: Prepare→checkpoint→execute→verify | Prepare the serving configuration within existing resource authorization, preserve a recoverable checkpoint of the affected state, configure the model service only where current authorization permits, and then verify model identity and an actual valid inference response. |
| 133 non-ASCII byte (character unassigned) | Model service: Execute→focused check→report | Configure the model service only where current authorization permits, run the focused checks needed to verify model identity and an actual valid inference response, and report evidence and remaining limits. |
| 134 non-ASCII byte (character unassigned) | Model service: Failure→trace→correct→recheck | For a failed step in the assigned model service, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 135 non-ASCII byte (character unassigned) | Model service: Snapshot→execute→compare→report | Record the relevant state before the assigned model service; configure the model service only where current authorization permits; compare the resulting state with the intended outcome and report material differences. |
| 136 non-ASCII byte (character unassigned) | Model service: Blocker→checkpoint→notify→wait | If the assigned model service is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 137 non-ASCII byte (character unassigned) | Model service: Stop→preserve→record | On an operator stop affecting the assigned model service, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 138 non-ASCII byte (character unassigned) | Model service: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned model service, reconcile current state, complete only the unfinished authorized steps, and verify model identity and an actual valid inference response. |
| 139 non-ASCII byte (character unassigned) | Model service: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned model service, configure the model service only where current authorization permits, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 140 non-ASCII byte (character unassigned) | Model service: Claim→independent check→record | Record the completion claim for the assigned model service, independently verify model identity and an actual valid inference response, and record the verification outcome separately from the claim. |
| 141 non-ASCII byte (character unassigned) | Model service: Finish→document→notify→receipt | Finish the authorized work on the assigned model service, verify model identity and an actual valid inference response, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 142 non-ASCII byte (character unassigned) | Model service: Dependency→refresh→resume→verify | When the recorded dependency for the assigned model service changes, refresh actual state and authorization, resume only if the hold is resolved, and verify model identity and an actual valid inference response. |
| 143 non-ASCII byte (character unassigned) | Model service: Diff→boundary check→evidence→handoff | Review the final changes for the assigned model service, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 144 non-ASCII byte (character unassigned) | Storage: Inspect→prepare→execute→verify→report | Inventory the source, destination, and available capacity; prepare a transfer manifest preserving source data; copy the authorized data to the approved destination; then verify object identity, size, and integrity without deleting the source, and report the result. |
| 145 non-ASCII byte (character unassigned) | Storage: Inspect→diagnose→report | Inventory the source, destination, and available capacity, identify the cause of the observed problem with the assigned data relocation, and report exact evidence without applying a change. |
| 146 non-ASCII byte (character unassigned) | Storage: Read→compare→record | Read the authoritative requirements for the assigned data relocation, compare them with actual evidence, and record concrete discrepancies. |
| 147 non-ASCII byte (character unassigned) | Storage: Inspect→plan→review | Inventory the source, destination, and available capacity; then prepare a transfer manifest preserving source data, and present the plan for review without executing the change. |
| 148 non-ASCII byte (character unassigned) | Storage: Prepare→checkpoint→execute→verify | Prepare a transfer manifest preserving source data, preserve a recoverable checkpoint of the affected state, copy the authorized data to the approved destination, and then verify object identity, size, and integrity without deleting the source. |
| 149 non-ASCII byte (character unassigned) | Storage: Execute→focused check→report | Copy the authorized data to the approved destination, run the focused checks needed to verify object identity, size, and integrity without deleting the source, and report evidence and remaining limits. |
| 150 non-ASCII byte (character unassigned) | Storage: Failure→trace→correct→recheck | For a failed step in the assigned data relocation, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 151 non-ASCII byte (character unassigned) | Storage: Snapshot→execute→compare→report | Record the relevant state before the assigned data relocation; copy the authorized data to the approved destination; compare the resulting state with the intended outcome and report material differences. |
| 152 non-ASCII byte (character unassigned) | Storage: Blocker→checkpoint→notify→wait | If the assigned data relocation is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 153 non-ASCII byte (character unassigned) | Storage: Stop→preserve→record | On an operator stop affecting the assigned data relocation, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 154 non-ASCII byte (character unassigned) | Storage: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned data relocation, reconcile current state, complete only the unfinished authorized steps, and verify object identity, size, and integrity without deleting the source. |
| 155 non-ASCII byte (character unassigned) | Storage: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned data relocation, copy the authorized data to the approved destination, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 156 non-ASCII byte (character unassigned) | Storage: Claim→independent check→record | Record the completion claim for the assigned data relocation, independently verify object identity, size, and integrity without deleting the source, and record the verification outcome separately from the claim. |
| 157 non-ASCII byte (character unassigned) | Storage: Finish→document→notify→receipt | Finish the authorized work on the assigned data relocation, verify object identity, size, and integrity without deleting the source, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 158 non-ASCII byte (character unassigned) | Storage: Dependency→refresh→resume→verify | When the recorded dependency for the assigned data relocation changes, refresh actual state and authorization, resume only if the hold is resolved, and verify object identity, size, and integrity without deleting the source. |
| 159 non-ASCII byte (character unassigned) | Storage: Diff→boundary check→evidence→handoff | Review the final changes for the assigned data relocation, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 160 non-ASCII byte (character unassigned) | Provisioning: Inspect→prepare→execute→verify→report | Inspect the exact rental identity and bounded provisioning authority; prepare the package, repository, credential-binding, and recovery plan; configure only the already authorized instance within its spending boundary; then verify the required packages, repositories, crew binding, and service readiness, and report the result. |
| 161 non-ASCII byte (character unassigned) | Provisioning: Inspect→diagnose→report | Inspect the exact rental identity and bounded provisioning authority, identify the cause of the observed problem with the explicitly authorized server setup, and report exact evidence without applying a change. |
| 162 non-ASCII byte (character unassigned) | Provisioning: Read→compare→record | Read the authoritative requirements for the explicitly authorized server setup, compare them with actual evidence, and record concrete discrepancies. |
| 163 non-ASCII byte (character unassigned) | Provisioning: Inspect→plan→review | Inspect the exact rental identity and bounded provisioning authority; then prepare the package, repository, credential-binding, and recovery plan, and present the plan for review without executing the change. |
| 164 non-ASCII byte (character unassigned) | Provisioning: Prepare→checkpoint→execute→verify | Prepare the package, repository, credential-binding, and recovery plan, preserve a recoverable checkpoint of the affected state, configure only the already authorized instance within its spending boundary, and then verify the required packages, repositories, crew binding, and service readiness. |
| 165 non-ASCII byte (character unassigned) | Provisioning: Execute→focused check→report | Configure only the already authorized instance within its spending boundary, run the focused checks needed to verify the required packages, repositories, crew binding, and service readiness, and report evidence and remaining limits. |
| 166 non-ASCII byte (character unassigned) | Provisioning: Failure→trace→correct→recheck | For a failed step in the explicitly authorized server setup, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 167 non-ASCII byte (character unassigned) | Provisioning: Snapshot→execute→compare→report | Record the relevant state before the explicitly authorized server setup; configure only the already authorized instance within its spending boundary; compare the resulting state with the intended outcome and report material differences. |
| 168 non-ASCII byte (character unassigned) | Provisioning: Blocker→checkpoint→notify→wait | If the explicitly authorized server setup is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 169 non-ASCII byte (character unassigned) | Provisioning: Stop→preserve→record | On an operator stop affecting the explicitly authorized server setup, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 170 non-ASCII byte (character unassigned) | Provisioning: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the explicitly authorized server setup, reconcile current state, complete only the unfinished authorized steps, and verify the required packages, repositories, crew binding, and service readiness. |
| 171 non-ASCII byte (character unassigned) | Provisioning: Baseline→execute→measure→compare | Measure the relevant baseline for the explicitly authorized server setup, configure only the already authorized instance within its spending boundary, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 172 non-ASCII byte (character unassigned) | Provisioning: Claim→independent check→record | Record the completion claim for the explicitly authorized server setup, independently verify the required packages, repositories, crew binding, and service readiness, and record the verification outcome separately from the claim. |
| 173 non-ASCII byte (character unassigned) | Provisioning: Finish→document→notify→receipt | Finish the authorized work on the explicitly authorized server setup, verify the required packages, repositories, crew binding, and service readiness, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 174 non-ASCII byte (character unassigned) | Provisioning: Dependency→refresh→resume→verify | When the recorded dependency for the explicitly authorized server setup changes, refresh actual state and authorization, resume only if the hold is resolved, and verify the required packages, repositories, crew binding, and service readiness. |
| 175 non-ASCII byte (character unassigned) | Provisioning: Diff→boundary check→evidence→handoff | Review the final changes for the explicitly authorized server setup, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 176 non-ASCII byte (character unassigned) | Backup: Inspect→prepare→execute→verify→report | Inspect the source records and approved backup destination; prepare a consistent recovery manifest; create the authorized backup without removing the source; then restore into an isolated approved destination and verify recoverability, and report the result. |
| 177 non-ASCII byte (character unassigned) | Backup: Inspect→diagnose→report | Inspect the source records and approved backup destination, identify the cause of the observed problem with the assigned backup, and report exact evidence without applying a change. |
| 178 non-ASCII byte (character unassigned) | Backup: Read→compare→record | Read the authoritative requirements for the assigned backup, compare them with actual evidence, and record concrete discrepancies. |
| 179 non-ASCII byte (character unassigned) | Backup: Inspect→plan→review | Inspect the source records and approved backup destination; then prepare a consistent recovery manifest, and present the plan for review without executing the change. |
| 180 non-ASCII byte (character unassigned) | Backup: Prepare→checkpoint→execute→verify | Prepare a consistent recovery manifest, preserve a recoverable checkpoint of the affected state, create the authorized backup without removing the source, and then restore into an isolated approved destination and verify recoverability. |
| 181 non-ASCII byte (character unassigned) | Backup: Execute→focused check→report | Create the authorized backup without removing the source, run the focused checks needed to restore into an isolated approved destination and verify recoverability, and report evidence and remaining limits. |
| 182 non-ASCII byte (character unassigned) | Backup: Failure→trace→correct→recheck | For a failed step in the assigned backup, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 183 non-ASCII byte (character unassigned) | Backup: Snapshot→execute→compare→report | Record the relevant state before the assigned backup; create the authorized backup without removing the source; compare the resulting state with the intended outcome and report material differences. |
| 184 non-ASCII byte (character unassigned) | Backup: Blocker→checkpoint→notify→wait | If the assigned backup is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 185 non-ASCII byte (character unassigned) | Backup: Stop→preserve→record | On an operator stop affecting the assigned backup, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 186 non-ASCII byte (character unassigned) | Backup: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned backup, reconcile current state, complete only the unfinished authorized steps, and restore into an isolated approved destination and verify recoverability. |
| 187 non-ASCII byte (character unassigned) | Backup: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned backup, create the authorized backup without removing the source, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 188 non-ASCII byte (character unassigned) | Backup: Claim→independent check→record | Record the completion claim for the assigned backup, independently restore into an isolated approved destination and verify recoverability, and record the verification outcome separately from the claim. |
| 189 non-ASCII byte (character unassigned) | Backup: Finish→document→notify→receipt | Finish the authorized work on the assigned backup, restore into an isolated approved destination and verify recoverability, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 190 non-ASCII byte (character unassigned) | Backup: Dependency→refresh→resume→verify | When the recorded dependency for the assigned backup changes, refresh actual state and authorization, resume only if the hold is resolved, and restore into an isolated approved destination and verify recoverability. |
| 191 non-ASCII byte (character unassigned) | Backup: Diff→boundary check→evidence→handoff | Review the final changes for the assigned backup, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 192 non-ASCII byte (character unassigned) | Roster: Inspect→prepare→execute→verify→report | Inspect the authoritative identity, role, and project membership; prepare the bounded record change preserving history; apply only the assigned roster attribute change; then read back the central record and check its effective app projection, and report the result. |
| 193 non-ASCII byte (character unassigned) | Roster: Inspect→diagnose→report | Inspect the authoritative identity, role, and project membership, identify the cause of the observed problem with the authorized crew record change, and report exact evidence without applying a change. |
| 194 non-ASCII byte (character unassigned) | Roster: Read→compare→record | Read the authoritative requirements for the authorized crew record change, compare them with actual evidence, and record concrete discrepancies. |
| 195 non-ASCII byte (character unassigned) | Roster: Inspect→plan→review | Inspect the authoritative identity, role, and project membership; then prepare the bounded record change preserving history, and present the plan for review without executing the change. |
| 196 non-ASCII byte (character unassigned) | Roster: Prepare→checkpoint→execute→verify | Prepare the bounded record change preserving history, preserve a recoverable checkpoint of the affected state, apply only the assigned roster attribute change, and then read back the central record and check its effective app projection. |
| 197 non-ASCII byte (character unassigned) | Roster: Execute→focused check→report | Apply only the assigned roster attribute change, run the focused checks needed to read back the central record and check its effective app projection, and report evidence and remaining limits. |
| 198 non-ASCII byte (character unassigned) | Roster: Failure→trace→correct→recheck | For a failed step in the authorized crew record change, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 199 non-ASCII byte (character unassigned) | Roster: Snapshot→execute→compare→report | Record the relevant state before the authorized crew record change; apply only the assigned roster attribute change; compare the resulting state with the intended outcome and report material differences. |
| 200 non-ASCII byte (character unassigned) | Roster: Blocker→checkpoint→notify→wait | If the authorized crew record change is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 201 non-ASCII byte (character unassigned) | Roster: Stop→preserve→record | On an operator stop affecting the authorized crew record change, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 202 non-ASCII byte (character unassigned) | Roster: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the authorized crew record change, reconcile current state, complete only the unfinished authorized steps, and read back the central record and check its effective app projection. |
| 203 non-ASCII byte (character unassigned) | Roster: Baseline→execute→measure→compare | Measure the relevant baseline for the authorized crew record change, apply only the assigned roster attribute change, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 204 non-ASCII byte (character unassigned) | Roster: Claim→independent check→record | Record the completion claim for the authorized crew record change, independently read back the central record and check its effective app projection, and record the verification outcome separately from the claim. |
| 205 non-ASCII byte (character unassigned) | Roster: Finish→document→notify→receipt | Finish the authorized work on the authorized crew record change, read back the central record and check its effective app projection, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 206 non-ASCII byte (character unassigned) | Roster: Dependency→refresh→resume→verify | When the recorded dependency for the authorized crew record change changes, refresh actual state and authorization, resume only if the hold is resolved, and read back the central record and check its effective app projection. |
| 207 non-ASCII byte (character unassigned) | Roster: Diff→boundary check→evidence→handoff | Review the final changes for the authorized crew record change, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 208 non-ASCII byte (character unassigned) | Performance: Inspect→prepare→execute→verify→report | Trace the actual request-to-delivery path; measure a baseline and prepare one scoped optimization; apply the scoped optimization; then measure comparable requests and check correctness alongside latency, and report the result. |
| 209 non-ASCII byte (character unassigned) | Performance: Inspect→diagnose→report | Trace the actual request-to-delivery path, identify the cause of the observed problem with the assigned latency optimization, and report exact evidence without applying a change. |
| 210 non-ASCII byte (character unassigned) | Performance: Read→compare→record | Read the authoritative requirements for the assigned latency optimization, compare them with actual evidence, and record concrete discrepancies. |
| 211 non-ASCII byte (character unassigned) | Performance: Inspect→plan→review | Trace the actual request-to-delivery path; then measure a baseline and prepare one scoped optimization, and present the plan for review without executing the change. |
| 212 non-ASCII byte (character unassigned) | Performance: Prepare→checkpoint→execute→verify | Measure a baseline and prepare one scoped optimization, preserve a recoverable checkpoint of the affected state, apply the scoped optimization, and then measure comparable requests and check correctness alongside latency. |
| 213 non-ASCII byte (character unassigned) | Performance: Execute→focused check→report | Apply the scoped optimization, run the focused checks needed to measure comparable requests and check correctness alongside latency, and report evidence and remaining limits. |
| 214 non-ASCII byte (character unassigned) | Performance: Failure→trace→correct→recheck | For a failed step in the assigned latency optimization, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 215 non-ASCII byte (character unassigned) | Performance: Snapshot→execute→compare→report | Record the relevant state before the assigned latency optimization; apply the scoped optimization; compare the resulting state with the intended outcome and report material differences. |
| 216 non-ASCII byte (character unassigned) | Performance: Blocker→checkpoint→notify→wait | If the assigned latency optimization is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 217 non-ASCII byte (character unassigned) | Performance: Stop→preserve→record | On an operator stop affecting the assigned latency optimization, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 218 non-ASCII byte (character unassigned) | Performance: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the assigned latency optimization, reconcile current state, complete only the unfinished authorized steps, and measure comparable requests and check correctness alongside latency. |
| 219 non-ASCII byte (character unassigned) | Performance: Baseline→execute→measure→compare | Measure the relevant baseline for the assigned latency optimization, apply the scoped optimization, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 220 non-ASCII byte (character unassigned) | Performance: Claim→independent check→record | Record the completion claim for the assigned latency optimization, independently measure comparable requests and check correctness alongside latency, and record the verification outcome separately from the claim. |
| 221 non-ASCII byte (character unassigned) | Performance: Finish→document→notify→receipt | Finish the authorized work on the assigned latency optimization, measure comparable requests and check correctness alongside latency, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 222 non-ASCII byte (character unassigned) | Performance: Dependency→refresh→resume→verify | When the recorded dependency for the assigned latency optimization changes, refresh actual state and authorization, resume only if the hold is resolved, and measure comparable requests and check correctness alongside latency. |
| 223 non-ASCII byte (character unassigned) | Performance: Diff→boundary check→evidence→handoff | Review the final changes for the assigned latency optimization, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 224 non-ASCII byte (character unassigned) | Context: Inspect→prepare→execute→verify→report | Read the current objective, steering, decisions, and outstanding work; select the minimal durable context and exact references; write the compact checkpoint without dropping operative constraints; then check that another continuation can identify the objective, evidence, remaining work, and next action, and report the result. |
| 225 non-ASCII byte (character unassigned) | Context: Inspect→diagnose→report | Read the current objective, steering, decisions, and outstanding work, identify the cause of the observed problem with the working context checkpoint, and report exact evidence without applying a change. |
| 226 non-ASCII byte (character unassigned) | Context: Read→compare→record | Read the authoritative requirements for the working context checkpoint, compare them with actual evidence, and record concrete discrepancies. |
| 227 non-ASCII byte (character unassigned) | Context: Inspect→plan→review | Read the current objective, steering, decisions, and outstanding work; then select the minimal durable context and exact references, and present the plan for review without executing the change. |
| 228 non-ASCII byte (character unassigned) | Context: Prepare→checkpoint→execute→verify | Select the minimal durable context and exact references, preserve a recoverable checkpoint of the affected state, write the compact checkpoint without dropping operative constraints, and then check that another continuation can identify the objective, evidence, remaining work, and next action. |
| 229 non-ASCII byte (character unassigned) | Context: Execute→focused check→report | Write the compact checkpoint without dropping operative constraints, run the focused checks needed to check that another continuation can identify the objective, evidence, remaining work, and next action, and report evidence and remaining limits. |
| 230 non-ASCII byte (character unassigned) | Context: Failure→trace→correct→recheck | For a failed step in the working context checkpoint, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 231 non-ASCII byte (character unassigned) | Context: Snapshot→execute→compare→report | Record the relevant state before the working context checkpoint; write the compact checkpoint without dropping operative constraints; compare the resulting state with the intended outcome and report material differences. |
| 232 non-ASCII byte (character unassigned) | Context: Blocker→checkpoint→notify→wait | If the working context checkpoint is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 233 non-ASCII byte (character unassigned) | Context: Stop→preserve→record | On an operator stop affecting the working context checkpoint, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 234 non-ASCII byte (character unassigned) | Context: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the working context checkpoint, reconcile current state, complete only the unfinished authorized steps, and check that another continuation can identify the objective, evidence, remaining work, and next action. |
| 235 non-ASCII byte (character unassigned) | Context: Baseline→execute→measure→compare | Measure the relevant baseline for the working context checkpoint, write the compact checkpoint without dropping operative constraints, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 236 non-ASCII byte (character unassigned) | Context: Claim→independent check→record | Record the completion claim for the working context checkpoint, independently check that another continuation can identify the objective, evidence, remaining work, and next action, and record the verification outcome separately from the claim. |
| 237 non-ASCII byte (character unassigned) | Context: Finish→document→notify→receipt | Finish the authorized work on the working context checkpoint, check that another continuation can identify the objective, evidence, remaining work, and next action, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 238 non-ASCII byte (character unassigned) | Context: Dependency→refresh→resume→verify | When the recorded dependency for the working context checkpoint changes, refresh actual state and authorization, resume only if the hold is resolved, and check that another continuation can identify the objective, evidence, remaining work, and next action. |
| 239 non-ASCII byte (character unassigned) | Context: Diff→boundary check→evidence→handoff | Review the final changes for the working context checkpoint, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
| 240 non-ASCII byte (character unassigned) | Phrasebook: Inspect→prepare→execute→verify→report | Read the proposed meanings and the source expressions; prepare the versioned candidate mapping with stable code slots; update only the draft mapping under review; then check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol, and report the result. |
| 241 non-ASCII byte (character unassigned) | Phrasebook: Inspect→diagnose→report | Read the proposed meanings and the source expressions, identify the cause of the observed problem with the candidate phrasebook mapping, and report exact evidence without applying a change. |
| 242 non-ASCII byte (character unassigned) | Phrasebook: Read→compare→record | Read the authoritative requirements for the candidate phrasebook mapping, compare them with actual evidence, and record concrete discrepancies. |
| 243 non-ASCII byte (character unassigned) | Phrasebook: Inspect→plan→review | Read the proposed meanings and the source expressions; then prepare the versioned candidate mapping with stable code slots, and present the plan for review without executing the change. |
| 244 non-ASCII byte (character unassigned) | Phrasebook: Prepare→checkpoint→execute→verify | Prepare the versioned candidate mapping with stable code slots, preserve a recoverable checkpoint of the affected state, update only the draft mapping under review, and then check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol. |
| 245 non-ASCII byte (character unassigned) | Phrasebook: Execute→focused check→report | Update only the draft mapping under review, run the focused checks needed to check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol, and report evidence and remaining limits. |
| 246 non-ASCII byte (character unassigned) | Phrasebook: Failure→trace→correct→recheck | For a failed step in the candidate phrasebook mapping, preserve the failure evidence, trace its cause, correct it only within the assigned scope, and repeat the relevant acceptance check. |
| 247 non-ASCII byte (character unassigned) | Phrasebook: Snapshot→execute→compare→report | Record the relevant state before the candidate phrasebook mapping; update only the draft mapping under review; compare the resulting state with the intended outcome and report material differences. |
| 248 non-ASCII byte (character unassigned) | Phrasebook: Blocker→checkpoint→notify→wait | If the candidate phrasebook mapping is genuinely blocked, preserve progress, record the exact dependency and completed portion, notify through the authorized system, and withhold only dependent actions. |
| 249 non-ASCII byte (character unassigned) | Phrasebook: Stop→preserve→record | On an operator stop affecting the candidate phrasebook mapping, stop the activity, preserve recoverable data and artifacts, record the stopped stage, and do not resume without authorization. |
| 250 non-ASCII byte (character unassigned) | Phrasebook: Recover→reconcile→finish→verify | Recover the latest valid checkpoint for the candidate phrasebook mapping, reconcile current state, complete only the unfinished authorized steps, and check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol. |
| 251 non-ASCII byte (character unassigned) | Phrasebook: Baseline→execute→measure→compare | Measure the relevant baseline for the candidate phrasebook mapping, update only the draft mapping under review, repeat a comparable measurement, and report both outcome quality and cycle-time differences. |
| 252 non-ASCII byte (character unassigned) | Phrasebook: Claim→independent check→record | Record the completion claim for the candidate phrasebook mapping, independently check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol, and record the verification outcome separately from the claim. |
| 253 non-ASCII byte (character unassigned) | Phrasebook: Finish→document→notify→receipt | Finish the authorized work on the candidate phrasebook mapping, check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol, document the result, notify the system, and verify its machine delivery receipt without a peer reply loop. |
| 254 non-ASCII byte (character unassigned) | Phrasebook: Dependency→refresh→resume→verify | When the recorded dependency for the candidate phrasebook mapping changes, refresh actual state and authorization, resume only if the hold is resolved, and check unique codes, ordered meanings, conditions, and prose expansions without activating a live protocol. |
| 255 non-ASCII byte (character unassigned) | Phrasebook: Diff→boundary check→evidence→handoff | Review the final changes for the candidate phrasebook mapping, verify project and permission boundaries, attach the evidence, and make only the already authorized handoff through the existing tracker. |
No matching expressions.
Separate workflow namespace; these codes do not replace phrasebook meanings. Draft only. All workflows retain existing scope, policy, permission and spending boundaries. Control characters are shown by name; bytes 128–255 have no assigned text character. Codes are byte slots, not verified model tokens. No live mappings changed.