FMVISION / COMPACTIONJAY + MERRITT

Morchestration

64 methods. One quarter of a byte’s possibilities.

64 populated · 192 reserved · 25% full

Download CSV

Down = sequential stages. Across = parallel operations. Each stage joins before the next. Parallel work requires ready inputs and independent effects; conflicting writes or dependent operations run in order. Gold marks added operations, regrouped parallel lanes and changed sequencing. Compare the previous parallel draft or historical sequence using the view selector.

256 of 256 slots

ASCII / byteCommandSequenceWhat it does
000 ASCII NULProtocol
  1. 01
    Extract requirementsIdentify constraintsDefine success
  2. 02
    Define data contractsDefine component interfacesDefine acceptance checks
  3. 03
    Integrate architecture and resolve dependencies
  4. 04
    Compare runtime optionsCompare storage optionsCompare delivery options
  5. 05
    Select stack
  6. 06
    Scaffold
  7. 07
    Implement components with agreed interfaces and disjoint ownership
  8. 08
    Integrate components
  9. 09
    Run unit checksRun isolated integration checksCheck requirements
  10. 10
    Resolve failures
  11. 11
    Write user guideWrite developer guideWrite operations guide
  12. 12
    Build target artifacts
  13. 13
    Install
  14. 14
    Verify delivered behavior
Control-flow changes
  • Define independent contracts and acceptance checks in parallel, then reconcile them before stack selection or component implementation.
  • Compare technology choices by independent concern against the accepted architecture.
  • Join component implementation through an explicit integration step before tests consume the combined application.
  • Parallel tests require isolated resources; shared-state checks serialize.
Builds an application from the initial request through testing, documentation, installation and delivery checks.
Original commandcommands/protocol.md
001 ASCII SOHOrchestrate
  1. 01
    Inspect requirementsInspect implementationInspect testsInspect documentation
  2. 02
    Classify gaps and dependencies
  3. 03
    Assign independent gap groups
  4. 04
    Resolve ready gaps with disjoint writes
  5. 05
    Integrate resolved gaps
  6. 06
    Verify resolved gapsCheck regressions
  7. 07
    Reconcile results
  8. 08
    Repeat for remaining gaps or report
Control-flow changes
  • Resolve only gaps whose prerequisites are satisfied; integrate before regression checks.
Applies the development protocol to a project, finds missing work and coordinates its resolution.
Original commandcommands/orchestrate.md
002 ASCII STXMorchestrate
  1. 01
    Assess projectEvaluate architectureAnalyze code qualityProfile performanceAudit securityReview documentationEvaluate testingAssess deployment
  2. 02
    Join findings and resolve dependencies
  3. 03
    Implement dependency-ready improvements in disjoint domains
  4. 04
    Integrate changes and resolve conflicts
  5. 05
    Check architectureCheck code qualityVerify securityValidate documentationRun isolated correctness tests
  6. 06
    Measure performance under controlled load
  7. 07
    Verify delivered artifact on its target
  8. 08
    Synthesize evidence
  9. 09
    Repeat unresolved work or report
Control-flow changes
  • Do not fork every domain blindly: only dependency-ready, non-conflicting changes enter the implementation wave.
  • Run independent evidence checks after integration; performance and delivery get their own stages.
  • Separate performance measurement from competing tests, and verify delivery only after validated changes reach the target.
  • Replace the old mixed verification wave with isolated correctness checks; keep all verification obligations.
Runs a coordinated project-improvement cycle across architecture, quality, performance, security, documentation, testing and deployment.
Original commandcommands/morchestrate.md
003 ASCII ETXAnalyze
  1. 01
    Discover sourcesExtract existing knowledge
  2. 02
    Join source inventory
  3. 03
    Analyze independent topicsSearch for contradictory evidence
  4. 04
    Synthesize findings
  5. 05
    Check evidenceCheck consistency
  6. 06
    Apply validated learning
  7. 07
    Measure outcome
  8. 08
    Consolidate reusable knowledge
Control-flow changes
  • Add an explicit contradiction-search lane before synthesis.
Collects project knowledge, combines findings and turns them into recommendations and reusable learning.
Original commandcommands/analyze.md
004 ASCII EOTAnalyzex
  1. 01
    Read targetEstablish analysis criteria
  2. 02
    Analyze independent sections
  3. 03
    Combine findings
  4. 04
    Validate evidenceCheck completeness
  5. 05
    Integrate report
Runs the defined analysis operation, validates its result and integrates the findings.
Original commandcommands/analyzex.md
005 ASCII ENQArchitect
  1. 01
    Map componentsMap data flowInventory dependencies
  2. 02
    Join architecture model
  3. 03
    Assess couplingAssess scalabilityAssess securityAssess data designAssess deploymentAssess failure and recovery paths
  4. 04
    Reconcile cross-domain tradeoffs
  5. 05
    Design improvements
  6. 06
    Validate interfacesValidate requirements
  7. 07
    Report
Control-flow changes
  • Assess recovery alongside architecture concerns from the same agreed system model.
Examines a system’s structure and develops improvements to its components, dependencies, security, data handling and deployment.
Original commandcommands/architect.md
006 ASCII ACKAsk
  1. 01
    Read questionRecover relevant context
  2. 02
    Classify question
  3. 03
    Investigate independent subquestionsCheck alternative interpretations
  4. 04
    Combine answers
  5. 05
    Verify factsCheck consistency
  6. 06
    Answer
Control-flow changes
  • Investigate competing interpretations before combining the answer.
Investigates a question using relevant expertise and assembles a supported answer.
Original commandcommands/ask.md
007 ASCII BELAssess
  1. 01
    Inventory projectRead stated requirements
  2. 02
    Join assessment scope
  3. 03
    Assess codeAssess architectureAssess securityAssess documentationAssess testsAssess performanceAssess workflowCompare delivered behavior with acceptance criteria
  4. 04
    Reconcile findings
  5. 05
    Prioritize gaps
  6. 06
    Report
Control-flow changes
  • Assess actual delivered behavior alongside source and process evidence.
Examines a project’s current condition and identifies weaknesses across code, architecture, security, documentation, testing and operations.
Original commandcommands/assess.md
008 ASCII BSAudit
  1. 01
    Extract claims
  2. 02
    Verify system claimsCheck calculationsVerify external factsCheck internal consistencyCheck artifact provenance
  3. 03
    Join evidence
  4. 04
    Resolve contradictions
  5. 05
    Rate claim support
  6. 06
    Report
Control-flow changes
  • Check where the cited artifacts came from alongside factual and mathematical checks.
Checks a document’s claims against system evidence, calculations, external sources and internal consistency.
Original commandcommands/audit.md
009 ASCII HTBench
  1. 01
    Identify projectRead comparison objective
  2. 02
    Select metrics
  3. 03
    Fix comparable conditions
  4. 04
    Reserve controlled measurement conditions
  5. 05
    Collect measurements sequentially on shared resources; fork only isolated targets
  6. 06
    Validate measurement comparability
  7. 07
    Compare results
  8. 08
    Generate report
  9. 09
    Check calculationsCheck completeness
Control-flow changes
  • Avoid concurrent measurements contaminating each other on shared hardware.
Chooses suitable measurements for a project, collects data and produces a comparative benchmark report.
Original commandcommands/bench.md
010 ASCII LFBenchmark
  1. 01
    Measure baseline
  2. 02
    Locate bottlenecks
  3. 03
    Design optimization
  4. 04
    Improve disjoint bottlenecks
  5. 05
    Integrate changes
  6. 06
    Run correctness checks
  7. 07
    Measure performance under the baseline conditions
  8. 08
    Compare against baseline
  9. 09
    Configure monitoring
  10. 10
    Report
Control-flow changes
  • Measure performance after correctness work finishes so test load cannot skew the comparison.
Measures performance, locates bottlenecks and develops and checks improvements.
Original commandcommands/benchmark.md
011 ASCII VTBuild
  1. 01
    Read specificationRead purposeRead user goalsRead methods
  2. 02
    Reconcile requirements
  3. 03
    Select stack
  4. 04
    Scaffold
  5. 05
    Agree interfaces, shared data contracts and write ownership
  6. 06
    Implement dependency-ready modules with disjoint writes
  7. 07
    Integrate modules
  8. 08
    Run testsCheck requirementsCheck security
  9. 09
    Correct failures
  10. 10
    Update documentation
  11. 11
    Prepare delivery
Control-flow changes
  • Agree component contracts and write ownership before parallel implementation; retain the existing integration join.
Uses the project’s existing specification and documentation to implement and test the application.
Original commandcommands/build.md
012 ASCII FFCommands
  1. 01
    Discover definition files
  2. 02
    Parse independent definitions
  3. 03
    Join metadata
  4. 04
    Classify commandsMap command referencesDetect duplicate names and conflicting aliases
  5. 05
    Build sorted index
  6. 06
    Render output
  7. 07
    Check linksCheck coverage
  8. 08
    Cache metadata
Control-flow changes
  • Check namespace collisions alongside classification and cross-reference mapping.
Builds a searchable, categorized command index from command definition files.
Original commandcommands/commands.md
013 ASCII CRCommandsIndex
  1. 01
    Discover definition files
  2. 02
    Parse independent definitions
  3. 03
    Join metadata
  4. 04
    Classify commandsMap command referencesDetect duplicate names and conflicting aliases
  5. 05
    Build sorted index
  6. 06
    Render output
  7. 07
    Check linksCheck coverage
  8. 08
    Cache metadata
Control-flow changes
  • Check namespace collisions alongside classification and cross-reference mapping.
Builds a searchable, categorized command index from command definition files.
Original commandcommands/commands-index.md
014 ASCII SOCommitment
  1. 01
    Inspect repository statusInspect untracked filesInspect diff
  2. 02
    Categorize changes
  3. 03
    Map commit dependencies
  4. 04
    Commit in dependency order
  5. 05
    Verify historyVerify working state
  6. 06
    Synchronize authorized remote
  7. 07
    Document
Inspects repository changes and organizes them into dependency-ordered commits with final checks and reporting.
Original commandcommands/commitment.md
015 ASCII SICompose
  1. 01
    Read prompt
  2. 02
    Extract intentIdentify explicit nameIdentify constraints
  3. 03
    Reconcile command meaning
  4. 04
    Generate candidate names
  5. 05
    Select concise name
  6. 06
    Define argumentsDefine outputsDefine validation
  7. 07
    Assemble execution specification
  8. 08
    Write command documentation
  9. 09
    Validate specificationCheck namespace conflictsCheck ordered dependencies and parallel-safety assumptions
  10. 10
    Prepare deployment
Control-flow changes
  • Validate control-flow assumptions alongside names and content before preparing a command for deployment.
Turns a request into a named command specification with arguments, execution steps, validation and documentation.
Original commandcommands/compose.md
016 ASCII DLEConstruct
  1. 01
    Read requestDiscover available commands
  2. 02
    Select initial command
  3. 03
    Execute selected command
  4. 04
    Inspect outputCheck remaining requirements
  5. 05
    Choose next command from results
  6. 06
    Resolve branch dependencies and write ownership
  7. 07
    Execute ready branches with independent effects
  8. 08
    Join branch results
  9. 09
    Audit claimsVerify behaviorRun relevant tests
  10. 10
    Correct failures
  11. 11
    Reassess completion
  12. 12
    Deliver or repeat
Control-flow changes
  • Choose parallel branches from the observed output and dependency graph, rather than executing every plausible next command.
Builds a product by selecting the next command from the preceding result and repeating correction and validation as needed.
Original commandcommands/construct.md
017 ASCII DC1Coordinate
  1. 01
    Discover agentsInspect task scopeInspect resources
  2. 02
    Decompose work
  3. 03
    Resolve dependencies and assignments
  4. 04
    Verify assignment prerequisites and disjoint ownership
  5. 05
    Execute ready independent assignments
  6. 06
    Join outputs
  7. 07
    Check consistencyVerify acceptance criteria
  8. 08
    Resolve conflicts
  9. 09
    Consolidate knowledge
  10. 10
    Assess coordination
Control-flow changes
  • Only ready assignments with non-conflicting ownership can run in the same wave.
Organizes specialist work, coordinates progress and combines and validates the results.
Original commandcommands/coordinate.md
018 ASCII DC2Corrcmd
  1. 01
    Read correction targetRead protocol requirements
  2. 02
    Prepare correction
  3. 03
    Execute independent correction units
  4. 04
    Integrate corrections
  5. 05
    Verify outcomeCheck affected interfaces
  6. 06
    Record result
Runs the specified correction protocol through preparation, execution, validation and integration.
Original commandcommands/corrcmd.md
019 ASCII DC3Correct
  1. 01
    Extract documentation claims
  2. 02
    Check source behaviorCheck configurationCheck supporting evidence
  3. 03
    Join discrepancies
  4. 04
    Correct independent sections
  5. 05
    Check consistencyVerify corrected claims
  6. 06
    Integrate corrections
Checks documentation claims against evidence, corrects inaccuracies and incorporates the corrected result.
Original commandcommands/correct.md
020 ASCII DC4Debug
  1. 01
    Read issueInspect environmentRead relevant logs
  2. 02
    Reproduce failure
  3. 03
    Test independent cause hypotheses
  4. 04
    Identify root cause
  5. 05
    Implement fix
  6. 06
    Run focused testsCheck regressions
  7. 07
    Assess impact
  8. 08
    Document
Investigates a reported problem, identifies its cause, applies a fix and checks for regressions.
Original commandcommands/debug.md
021 ASCII NAKDeclaude
  1. 01
    Extract claims
  2. 02
    Check system stateCheck artifactsCheck quantitative assertionsCompare claimed completion with acceptance evidence
  3. 03
    Join evidence
  4. 04
    Identify reality gaps
  5. 05
    Correct unsupported claims
  6. 06
    Verify revised account
  7. 07
    Report
Control-flow changes
  • Check claimed completion against acceptance evidence rather than only file existence.
Compares an agent’s claims with observable evidence and rewrites unsupported or exaggerated conclusions.
Original commandcommands/declaude.md
022 ASCII SYNDefine
  1. 01
    Inventory filesRead existing documentation
  2. 02
    Join scope
  3. 03
    Analyze independent componentsCompare exposed interfaces with implementations
  4. 04
    Correlate code and documentation
  5. 05
    Classify functionality
  6. 06
    Write independent reference sections
  7. 07
    Check accuracyCheck coverage
  8. 08
    Publish report
Control-flow changes
  • Compare public interfaces against actual component behavior before documenting functionality.
Examines the code and documentation to produce a structured account of what a system actually does.
Original commandcommands/define.md
023 ASCII ETBDeploy
  1. 01
    Inspect pipelineInspect environmentsInspect release requirements
  2. 02
    Design deployment plan
  3. 03
    Prepare disjoint infrastructure configurationPrepare build automationPrepare observability
  4. 04
    Integrate deployment configuration
  5. 05
    Check securityCheck environment consistencyCheck build artifacts
  6. 06
    Deploy prerequisites in required order
  7. 07
    Deploy independent targets only after prerequisites are healthy
  8. 08
    Read back deployed state
  9. 09
    Measure health
  10. 10
    Report
Control-flow changes
  • Separate prerequisite deployment from independent target rollout.
Examines and improves a project’s deployment pipeline, infrastructure, environments, monitoring and release operations.
Original commandcommands/deploy.md
024 ASCII CANDeployx
  1. 01
    Inspect deployment targetRead deployment requirements
  2. 02
    Prepare artifact
  3. 03
    Validate artifactValidate target readiness
  4. 04
    Deploy
  5. 05
    Read back installed version
  6. 06
    Check health of the read-back version
  7. 07
    Record outcome
Control-flow changes
  • Check health against the exact installed artifact after readback establishes its identity.
Prepares and performs the specified deployment operation, checks its result and integrates the outcome.
Original commandcommands/deployx.md
025 ASCII EMDesign
  1. 01
    Read design briefInventory templatesInspect existing components
  2. 02
    Select templates
  3. 03
    Assemble independent components
  4. 04
    Integrate layout
  5. 05
    Check interactionsCheck accessibility
  6. 06
    Refine
  7. 07
    Prepare implementation update
Selects reusable templates and components, assembles a design and iterates it toward implementation.
Original commandcommands/design.md
026 ASCII SUBDifferentiate
  1. 01
    Identify entities
  2. 02
    Fix comparison dimensions
  3. 03
    Analyze each entity independently
  4. 04
    Join comparable findings
  5. 05
    Compare similarities and differences
  6. 06
    Check evidenceCheck consistency
  7. 07
    Report
Compares several entities across relevant dimensions and explains their differences.
Original commandcommands/differentiate.md
027 ASCII ESCDocument
  1. 01
    Inventory documentationInspect implementationIdentify audiences
  2. 02
    Join documentation gaps
  3. 03
    Plan coverage
  4. 04
    Write independent sections
  5. 05
    Integrate documentation
  6. 06
    Validate examplesCheck linksCheck source accuracy
  7. 07
    Configure maintenance
  8. 08
    Report
Audits and improves technical and user documentation, its organization and its maintenance process.
Original commandcommands/document.md
028 ASCII FSEnhance
  1. 01
    Inspect current capabilityRead enhancement objective
  2. 02
    Design change
  3. 03
    Map dependencies
  4. 04
    Agree interfaces, shared data contracts and write ownership
  5. 05
    Implement dependency-ready modules with disjoint writes
  6. 06
    Integrate
  7. 07
    Test behaviorMeasure affected performanceCheck compatibility
  8. 08
    Deliver within scope
  9. 09
    Collect feedback
  10. 10
    Plan next iteration
Control-flow changes
  • Agree component contracts and write ownership before parallel implementation; retain the existing integration join.
Plans and implements an improvement to an existing system, tests it and follows its integration and feedback.
Original commandcommands/enhance.md
029 ASCII GSExplain
  1. 01
    Inventory targetRead surrounding context
  2. 02
    Join scope
  3. 03
    Analyze independent filesRead relevant interface contracts
  4. 04
    Map relationships
  5. 05
    Explain purpose and structure
  6. 06
    Check source accuracyCheck completeness
  7. 07
    Report
Control-flow changes
  • Read interface contracts alongside implementation files before explaining relationships.
Examines a file or directory and explains its contents, structure, dependencies and purpose.
Original commandcommands/explain.md
030 ASCII RSFabricate
  1. 01
    Read project specificationRead conceptsRead methodsRead user goals
  2. 02
    Reconcile implementation plan
  3. 03
    Scaffold
  4. 04
    Agree interfaces, shared data contracts and write ownership
  5. 05
    Implement dependency-ready modules with disjoint writes
  6. 06
    Integrate
  7. 07
    Run testsCheck specificationCheck deployment readiness
  8. 08
    Resolve gaps
  9. 09
    Prepare delivery
Control-flow changes
  • Agree component contracts and write ownership before parallel implementation; retain the existing integration join.
Uses a project’s documentation suite to generate its structure, implement features and check readiness for delivery.
Original commandcommands/fabricate.md
031 ASCII USFactualize
  1. 01
    Extract numerical claims
  2. 02
    Check calculationsCheck source measurementsCheck statistical consistencyCheck contextual validityCheck units and denominators
  3. 03
    Join findings
  4. 04
    Resolve discrepancies
  5. 05
    Compare corrected claims
  6. 06
    Report accuracy
Control-flow changes
  • Check units and denominators explicitly alongside calculations and source measurements.
Checks numerical and statistical claims against calculations, source data and their stated context.
Original commandcommands/factualize.md
032 ASCII SPACEFix
  1. 01
    Read issueInspect environmentRead relevant logs
  2. 02
    Reproduce failure
  3. 03
    Test independent cause hypotheses
  4. 04
    Identify root cause
  5. 05
    Implement fix
  6. 06
    Run focused testsCheck regressions
  7. 07
    Assess impact
  8. 08
    Document
Investigates a reported problem, identifies its cause, applies a fix and checks for regressions.
Original commandcommands/fix.md
033 ASCII !Flow
  1. 01
    Assess project
  2. 02
    Design architecture
  3. 03
    Validate qualityAssess security
  4. 04
    Benchmark performance under controlled conditions
  5. 05
    Join findings
  6. 06
    Apply dependency-ordered corrections
  7. 07
    Test integrated system
  8. 08
    Deploy
  9. 09
    Read back delivery
  10. 10
    Optimize against measured baseline
  11. 11
    Rerun affected checks
  12. 12
    Deliver any changed artifact
  13. 13
    Read back final delivery
  14. 14
    Report
Control-flow changes
  • Benchmark separately from security and quality inspection when they share resources.
  • Optimization after deployment changes the artifact: recheck, redeliver and read back before reporting completion.
Chains the assessment, architecture, quality, performance, security, testing, deployment and optimization commands.
Original commandcommands/flow.md
034 ASCII "Idiocratize
  1. 01
    Read original promptRead supplied context
  2. 02
    Identify reframing cues
  3. 03
    Apply requested context exercise
  4. 04
    Check response against actual instructions
  5. 05
    Respond
Provides an intentionally exaggerated context-and-identity reframing prompt for an agent.
Original commandcommands/idiocratize.md
035 ASCII #Implement
  1. 01
    Read command request
  2. 02
    Extract domainExtract actionIdentify constraints
  3. 03
    Generate candidate names
  4. 04
    Check name conflicts
  5. 05
    Select name
  6. 06
    Generate specificationGenerate usage examplesDefine dependency and join contracts
  7. 07
    Assemble command definition
  8. 08
    Validate content
  9. 09
    Create command file
Control-flow changes
  • Generate explicit dependency and join contracts alongside the command specification and examples.
Generates a new command definition from a request, including its name, documentation and validation.
Original commandcommands/implement.md
036 ASCII $Iterate
  1. 01
    Read completion criteriaRead current result
  2. 02
    Refine current result
  3. 03
    Assess requirementsAssess qualityCheck unresolved dependency list
  4. 04
    Audit evidence
  5. 05
    Join assessment
  6. 06
    Decide against explicit criteria: accept, refine, or record blocker
  7. 07
    Record iteration
  8. 08
    Repeat within limit or report
Control-flow changes
  • Completion assessment also inspects unresolved dependencies before accepting the result.
  • Make acceptance, refinement and a genuine blocker explicit alternative branches; the iteration limit remains in force.
Refines the work repeatedly, checks completion criteria and uses an audit before reporting the result.
Original commandcommands/iterate.md
037 ASCII %Janalyze
  1. 01
    Inventory filesystemRead organization constraints
  2. 02
    Classify independent file groups
  3. 03
    Map relationships and proposed hierarchy
  4. 04
    Check boundariesCheck loss risksCheck dependencies
  5. 05
    Generate cleanup plan
  6. 06
    Report without moving files
Inspects filesystem organization and produces a risk-aware cleanup plan without applying the cleanup.
Original commandcommands/janalyze.md
038 ASCII &Mandate
  1. 01
    Read protocolInspect target namespaces
  2. 02
    Analyze command meaning
  3. 03
    Map deployment targets
  4. 04
    Check conflictsCheck target compatibility
  5. 05
    Prepare namespace-specific files
  6. 06
    Deploy in synchronization order
  7. 07
    Validate CLI integrationValidate indexes
  8. 08
    Record deployment
Prepares and distributes command protocols across namespaces, CLI integration, synchronization and indexes.
Original commandcommands/mandate.md
039 ASCII 'Monetize
  1. 01
    Inspect projectAssess marketAssess competitors
  2. 02
    Join opportunity analysis
  3. 03
    Develop revenue modelsAssess partnership opportunities
  4. 04
    Compare options
  5. 05
    Plan technical integration
  6. 06
    Evaluate implementation effortEvaluate market assumptions
  7. 07
    Produce monetization plan
Examines a project’s market and revenue possibilities and develops a monetization and implementation plan.
Original commandcommands/monetize.md
040 ASCII (Optimize
  1. 01
    Define measurement conditions
  2. 02
    Measure baseline dimensions in separate windows on shared resources
  3. 03
    Join bottleneck model
  4. 04
    Choose scoped improvements
  5. 05
    Apply independent improvements
  6. 06
    Integrate
  7. 07
    Check correctness
  8. 08
    Repeat measurements under the same controlled conditions
  9. 09
    Compare against baseline
  10. 10
    Configure monitoring
  11. 11
    Report
Control-flow changes
  • Do not benchmark code, storage, network and user latency simultaneously on the same resource.
  • Separate correctness checks from timed measurements.
Measures and improves performance across code, storage, infrastructure and user interactions.
Original commandcommands/optimize.md
041 ASCII )Opus
  1. 01
    Validate target directory
  2. 02
    Analyze project purposeAnalyze user goalsIdentify concepts
  3. 03
    Join project model
  4. 04
    Draft purposeDraft intentDraft concepts
  5. 05
    Synthesize specification and methods
  6. 06
    Write documentation suite
  7. 07
    Check consistencyCheck completeness
  8. 08
    Report next steps
Creates a project documentation suite covering its purpose, user goals, concepts, specification and implementation methods.
Original commandcommands/opus.md
042 ASCII *Pitch
  1. 01
    Inspect projectIdentify audienceGather supporting evidence
  2. 02
    Define problem and value
  3. 03
    Analyze market contextIdentify differentiationCheck evidence for proposed differentiators
  4. 04
    Join positioning
  5. 05
    Construct narrative
  6. 06
    Draft pitch
  7. 07
    Check factual supportCheck audience fit
  8. 08
    Refine and deliver
Control-flow changes
  • Check differentiation claims before they enter the narrative.
Develops an audience-specific pitch explaining the project’s problem, value, evidence and opportunity.
Original commandcommands/pitch.md
043 ASCII +Plan
  1. 01
    Read requirementsRead referencesInspect project state
  2. 02
    Reconcile scope
  3. 03
    Classify complexity
  4. 04
    Decompose work
  5. 05
    Map dependenciesIdentify specialist needsDefine intermediate artifact contracts
  6. 06
    Reconcile assignments and order
  7. 07
    Add source references
  8. 08
    Compile plan
  9. 09
    Check coverageCheck feasibility
  10. 10
    Prepare execution
Control-flow changes
  • Plan the artifacts exchanged between dependent tasks alongside dependencies and specialist needs.
Converts a request into a project plan with tasks, dependencies, specialist roles, references and execution preparation.
Original commandcommands/plan.md
044 ASCII ,Productize
  1. 01
    Read problem
  2. 02
    Develop independent solution approaches
  3. 03
    Compare tradeoffs
  4. 04
    Select approach
  5. 05
    Write specification
  6. 06
    Plan parallel development lanesDefine monitoringDefine validation
  7. 07
    Reconcile implementation, monitoring and validation contracts
  8. 08
    Check cross-document consistency
  9. 09
    Deliver framework
Control-flow changes
  • Design monitoring and validation together from the accepted specification.
  • Join the three plans before cross-document consistency checks.
Turns a problem description into solution proposals, a specification, an implementation plan and monitoring documents.
Original commandcommands/productize.md
045 ASCII -Propose
  1. 01
    Decompose request
  2. 02
    Develop independent solution approaches
  3. 03
    Elaborate alternatives
  4. 04
    Compare costCompare riskCompare feasibilityCheck source support for each alternative
  5. 05
    Join tradeoffs
  6. 06
    Recommend
  7. 07
    Present proposal
Control-flow changes
  • Compare evidence support alongside cost, risk and feasibility.
Develops alternative solutions, compares their tradeoffs and presents recommendations.
Original commandcommands/propose.md
046 ASCII .Prove
  1. 01
    Extract claims
  2. 02
    Establish empirical baseline
  3. 03
    Decompose formulas
  4. 04
    Verify independent calculationsCheck dimensionsQuantify input uncertainty
  5. 05
    Propagate uncertainty through dependent calculations in order
  6. 06
    Join dependent calculations in order
  7. 07
    Check consistencyDetect impossibilities
  8. 08
    Assemble proof
Control-flow changes
  • Parallel local checks precede ordered uncertainty propagation through dependent calculations.
Checks numerical claims step by step and assembles a mathematical justification with uncertainty and consistency checks.
Original commandcommands/prove.md
047 ASCII /Rename
  1. 01
    Find target termIdentify scope boundaries
  2. 02
    Build replacement plan
  3. 03
    Check ambiguities
  4. 04
    Partition replacements by file ownership
  5. 05
    Apply replacements within disjoint file partitions
  6. 06
    Verify changed filesCheck missed occurrencesCheck references
  7. 07
    Report
Control-flow changes
  • Partition writes before running replacement batches so two workers do not edit the same file.
Finds a term, plans its replacements, applies them within the target scope and checks the result.
Original commandcommands/rename.md
048 ASCII 0Resolve
  1. 01
    Inspect gapsInspect specialist capabilities
  2. 02
    Prioritize and map dependencies
  3. 03
    Assign independent gaps
  4. 04
    Resolve prerequisite gaps first
  5. 05
    Resolve remaining ready gaps with disjoint writes
  6. 06
    Join changes
  7. 07
    Validate fixesCheck regressions
  8. 08
    Repeat unresolved gaps within limit
  9. 09
    Report
Control-flow changes
  • Resolve prerequisite gaps before dependent repairs; preserve a join before validation.
Assigns detected gaps to suitable specialists and iterates through fixes and validation.
Original commandcommands/resolve.md
049 ASCII 1Secure
  1. 01
    Inventory assetsRead access requirementsInspect infrastructure
  2. 02
    Build threat model
  3. 03
    Assess authenticationAssess data protectionAssess codeAssess networkAssess compliance
  4. 04
    Prioritize risks
  5. 05
    Apply dependency-ordered mitigations
  6. 06
    Test mitigationsCheck regressions
  7. 07
    Configure monitoring
  8. 08
    Report
Examines security risks and develops and checks improvements to access control, data protection, code and infrastructure.
Original commandcommands/secure.md
050 ASCII 2Sequence
  1. 01
    Read inputInspect available resources
  2. 02
    Decompose objectives
  3. 03
    Map prerequisites
  4. 04
    Design ordered stages
  5. 05
    Select toolsDefine outputsDefine checkpointsDefine recoveryDefine stage input contracts
  6. 06
    Reconcile execution plan
  7. 07
    Define tracking
  8. 08
    Validate feasibilityValidate completion criteria
  9. 09
    Deliver procedure
Control-flow changes
  • Declare the input contract for each stage alongside its outputs and checkpoints.
Turns a task or tool into an ordered procedure with dependencies, resources, progress tracking and validation.
Original commandcommands/sequence.md
051 ASCII 3Socket
  1. 01
    Inspect connection stateRead network contextRead relevant logs
  2. 02
    Diagnose connection failure
  3. 03
    Apply correction
  4. 04
    Verify connection
  5. 05
    Inspect distributed dependenciesInspect network topology
  6. 06
    Reconcile remaining faults
  7. 07
    Report
Examines and corrects connection problems and evaluates related distributed-system and network behavior.
Original commandcommands/socket.md
052 ASCII 4Test
  1. 01
    Read requirementsInventory testsInspect failure history
  2. 02
    Design testing strategy
  3. 03
    Build independent unit testsBuild independent integration tests
  4. 04
    Integrate test suite
  5. 05
    Run isolated unit testsRun integration tests with separate fixtures
  6. 06
    Run dependent end-to-end tests
  7. 07
    Assess coverageAssess reliabilityCheck test flakiness and order dependence
  8. 08
    Improve automation
  9. 09
    Report
Control-flow changes
  • Concurrent test groups require separate fixtures and resources; dependent end-to-end checks remain later.
  • Check order dependence explicitly after the test suite has run.
Develops and improves a testing strategy, its tests, automation and measures of effectiveness.
Original commandcommands/test.md
053 ASCII 5Testest
  1. 01
    Read testing targetRead acceptance criteria
  2. 02
    Prepare test environment
  3. 03
    Run independent checks
  4. 04
    Join test results
  5. 05
    Validate findings
  6. 06
    Integrate report
Prepares and runs the specified testing operation, validates the result and integrates the findings.
Original commandcommands/testest.md
054 ASCII 6Topologist
  1. 01
    Inspect topologyCheck repository status
  2. 02
    Decide whether initialization is needed
  3. 03
    Initialize only if authorized and needed
  4. 04
    Configure authorized remote
  5. 05
    Generate independent essential files
  6. 06
    Review staging plan
  7. 07
    Stage in dependency order
  8. 08
    Verify repository state
Examines repository structure and prepares the applicable Git initialization, remote configuration and essential files.
Original commandcommands/topologist.md
055 ASCII 7TopologistProtocol
  1. 01
    Read repository context
  2. 02
    Inspect changesInspect untracked filesDetect large filesCheck boundaries
  3. 03
    Map dependencies and commit categories
  4. 04
    Commit in dependency order
  5. 05
    Analyze resulting topologyVerify repository integrity
  6. 06
    Document outcomes
Inspects repository changes, organizes commits and produces topology and compliance documentation.
Original commandcommands/topologist-protocol.md
056 ASCII 8Update
  1. 01
    Detect source changesRead related references
  2. 02
    Assess affected content
  3. 03
    Plan dependency-ordered updates
  4. 04
    Revise sections with disjoint ownership
  5. 05
    Reconcile cross-references
  6. 06
    Check accuracyCheck consistency
  7. 07
    Deploy within scope
  8. 08
    Document
Control-flow changes
  • Limit parallel revisions to independently owned sections; cross-references remain reconciled at the next join.
Finds content changes, reconciles related material, validates the updates and documents their deployment.
Original commandcommands/update.md
057 ASCII 9ValidateQuality
  1. 01
    Read standardsInspect implementation
  2. 02
    Assess code metricsAssess testsAssess securityAssess maintainability
  3. 03
    Assess performance under controlled conditions
  4. 04
    Join quality findings
  5. 05
    Prioritize corrections
  6. 06
    Apply independent improvements
  7. 07
    Integrate
  8. 08
    Recheck non-performance qualityCheck regressions
  9. 09
    Recheck performance under the baseline conditions
  10. 10
    Document quality process
Control-flow changes
  • Avoid mixing performance sampling with other resource-consuming assessments.
  • Repeat performance measurements after other quality and regression work, not alongside them.
Assesses code standards, testing, performance, security and maintainability and develops quality improvements.
Original commandcommands/validate-quality.md
058 ASCII :VerificationEnforce
  1. 01
    Extract claims
  2. 02
    Collect artifact evidenceCollect execution evidenceCollect system evidenceCollect exact request and execution identities
  3. 03
    Match evidence to claims
  4. 04
    Classify supported and unsupported claims
  5. 05
    Record verification outcome
  6. 06
    Apply correction requirements
Control-flow changes
  • Bind verification to the exact request and execution, not merely the latest session state.
Checks agent claims against evidence and records unsupported claims and verification outcomes.
Original commandcommands/verification-enforce.md
059 ASCII ;Verify
  1. 01
    Read acceptance criteriaIdentify system boundaries
  2. 02
    Check functionalityCheck securityCheck integrationsCheck dataCheck isolated user interactions
  3. 03
    Measure performance in an exclusive measurement window
  4. 04
    Join verification results
  5. 05
    Resolve contradictions
  6. 06
    Record supported outcome and remaining gaps
Control-flow changes
  • Keep independent correctness checks parallel and isolate performance measurement from competing checks.
Checks a system’s functionality, security, performance, integrations, data and user experience.
Original commandcommands/verify.md
060 ASCII <Write
  1. 01
    Read writing request
  2. 02
    Extract intentIdentify audienceIdentify naming constraints
  3. 03
    Choose document name and structure
  4. 04
    Agree outline, terminology and shared claims
  5. 05
    Draft independent sections
  6. 06
    Integrate document
  7. 07
    Check accuracyCheck coherenceCheck brief coverage
  8. 08
    Deliver
Control-flow changes
  • Agree terminology and shared claims before splitting writing across sections.
Turns a writing request into an appropriately named and structured Markdown document.
Original commandcommands/write.md
061 ASCII =ResearchNew for Capsule
  1. 01
    Read questionRead acceptance criteriaInspect supplied source manifests
  2. 02
    Define research scope, hypotheses and evidence requirements
  3. 03
    Plan independent investigation lanes and source ownership
  4. 04
    Gather primary evidenceTest competing explanationsSearch for contradictory evidence
  5. 05
    Join findings and reconcile provenance
  6. 06
    Resolve consequential disagreements or record uncertainty
  7. 07
    Synthesize answerCompile evidence manifest and source references
  8. 08
    Verify claims against sourcesCheck calculations and assumptionsCheck acceptance criteria
  9. 09
    Register result and completion event
  10. 10
    Verify machine delivery receipt without automatic replay
Control-flow changes
  • New Capsule research method; every operation is an addition.
Investigates a scoped question through independent evidence-gathering lanes, reconciles disagreements and returns a sourced answer with artifacts and execution references.

Capsule addition · Merritt

062 ASCII >ReproduceNew for Capsule
  1. 01
    Read reported procedureInspect input hashesInspect environment recordRead claimed results
  2. 02
    Validate reproducibility prerequisites
  3. 03
    Prepare isolated environment and pinned inputs
  4. 04
    Run ordered prerequisites
  5. 05
    Run independent replications only on isolated resources
  6. 06
    Collect outputs and exact execution identities
  7. 07
    Compare results with original claimsCheck environment driftCheck statistical and measurement differences
  8. 08
    Classify reproduced, contradicted and unresolved claims
  9. 09
    Publish reproduction artifacts and receipt
Control-flow changes
  • New Capsule research method; every operation is an addition.
Repeats a reported experiment using pinned inputs, a recorded environment and comparable measurements, then reports agreements and discrepancies.

Capsule addition · Merritt

063 ASCII ?SynthesizeNew for Capsule
  1. 01
    Read objectiveLoad findings and source manifests
  2. 02
    Verify source identities and distinguish claims from verified results
  3. 03
    Extract supporting evidenceExtract contradictory evidenceIdentify coverage gaps
  4. 04
    Join evidence by claim and resolve dependent interpretations
  5. 05
    Draft conclusionsDraft limitations and unresolved questionsBuild claim-to-source map
  6. 06
    Reconcile conclusions, limitations and citations
  7. 07
    Check citation supportCheck consistencyCheck numerical assertions
  8. 08
    Package synthesis and evidence manifest
  9. 09
    Record delivery separately from acceptance
Control-flow changes
  • New Capsule research method; every operation is an addition.
Combines existing findings into a coherent conclusion while retaining source attribution, conflicting evidence, uncertainty and a checkable claim-to-source map.

Capsule addition · Merritt

064 ASCII @Reserved—No method assigned.
065 ASCII AReserved—No method assigned.
066 ASCII BReserved—No method assigned.
067 ASCII CReserved—No method assigned.
068 ASCII DReserved—No method assigned.
069 ASCII EReserved—No method assigned.
070 ASCII FReserved—No method assigned.
071 ASCII GReserved—No method assigned.
072 ASCII HReserved—No method assigned.
073 ASCII IReserved—No method assigned.
074 ASCII JReserved—No method assigned.
075 ASCII KReserved—No method assigned.
076 ASCII LReserved—No method assigned.
077 ASCII MReserved—No method assigned.
078 ASCII NReserved—No method assigned.
079 ASCII OReserved—No method assigned.
080 ASCII PReserved—No method assigned.
081 ASCII QReserved—No method assigned.
082 ASCII RReserved—No method assigned.
083 ASCII SReserved—No method assigned.
084 ASCII TReserved—No method assigned.
085 ASCII UReserved—No method assigned.
086 ASCII VReserved—No method assigned.
087 ASCII WReserved—No method assigned.
088 ASCII XReserved—No method assigned.
089 ASCII YReserved—No method assigned.
090 ASCII ZReserved—No method assigned.
091 ASCII [Reserved—No method assigned.
092 ASCII \Reserved—No method assigned.
093 ASCII ]Reserved—No method assigned.
094 ASCII ^Reserved—No method assigned.
095 ASCII _Reserved—No method assigned.
096 ASCII `Reserved—No method assigned.
097 ASCII aReserved—No method assigned.
098 ASCII bReserved—No method assigned.
099 ASCII cReserved—No method assigned.
100 ASCII dReserved—No method assigned.
101 ASCII eReserved—No method assigned.
102 ASCII fReserved—No method assigned.
103 ASCII gReserved—No method assigned.
104 ASCII hReserved—No method assigned.
105 ASCII iReserved—No method assigned.
106 ASCII jReserved—No method assigned.
107 ASCII kReserved—No method assigned.
108 ASCII lReserved—No method assigned.
109 ASCII mReserved—No method assigned.
110 ASCII nReserved—No method assigned.
111 ASCII oReserved—No method assigned.
112 ASCII pReserved—No method assigned.
113 ASCII qReserved—No method assigned.
114 ASCII rReserved—No method assigned.
115 ASCII sReserved—No method assigned.
116 ASCII tReserved—No method assigned.
117 ASCII uReserved—No method assigned.
118 ASCII vReserved—No method assigned.
119 ASCII wReserved—No method assigned.
120 ASCII xReserved—No method assigned.
121 ASCII yReserved—No method assigned.
122 ASCII zReserved—No method assigned.
123 ASCII {Reserved—No method assigned.
124 ASCII |Reserved—No method assigned.
125 ASCII }Reserved—No method assigned.
126 ASCII ~Reserved—No method assigned.
127 ASCII DELReserved—No method assigned.
128 non-ASCII byte (character unassigned)Reserved—No method assigned.
129 non-ASCII byte (character unassigned)Reserved—No method assigned.
130 non-ASCII byte (character unassigned)Reserved—No method assigned.
131 non-ASCII byte (character unassigned)Reserved—No method assigned.
132 non-ASCII byte (character unassigned)Reserved—No method assigned.
133 non-ASCII byte (character unassigned)Reserved—No method assigned.
134 non-ASCII byte (character unassigned)Reserved—No method assigned.
135 non-ASCII byte (character unassigned)Reserved—No method assigned.
136 non-ASCII byte (character unassigned)Reserved—No method assigned.
137 non-ASCII byte (character unassigned)Reserved—No method assigned.
138 non-ASCII byte (character unassigned)Reserved—No method assigned.
139 non-ASCII byte (character unassigned)Reserved—No method assigned.
140 non-ASCII byte (character unassigned)Reserved—No method assigned.
141 non-ASCII byte (character unassigned)Reserved—No method assigned.
142 non-ASCII byte (character unassigned)Reserved—No method assigned.
143 non-ASCII byte (character unassigned)Reserved—No method assigned.
144 non-ASCII byte (character unassigned)Reserved—No method assigned.
145 non-ASCII byte (character unassigned)Reserved—No method assigned.
146 non-ASCII byte (character unassigned)Reserved—No method assigned.
147 non-ASCII byte (character unassigned)Reserved—No method assigned.
148 non-ASCII byte (character unassigned)Reserved—No method assigned.
149 non-ASCII byte (character unassigned)Reserved—No method assigned.
150 non-ASCII byte (character unassigned)Reserved—No method assigned.
151 non-ASCII byte (character unassigned)Reserved—No method assigned.
152 non-ASCII byte (character unassigned)Reserved—No method assigned.
153 non-ASCII byte (character unassigned)Reserved—No method assigned.
154 non-ASCII byte (character unassigned)Reserved—No method assigned.
155 non-ASCII byte (character unassigned)Reserved—No method assigned.
156 non-ASCII byte (character unassigned)Reserved—No method assigned.
157 non-ASCII byte (character unassigned)Reserved—No method assigned.
158 non-ASCII byte (character unassigned)Reserved—No method assigned.
159 non-ASCII byte (character unassigned)Reserved—No method assigned.
160 non-ASCII byte (character unassigned)Reserved—No method assigned.
161 non-ASCII byte (character unassigned)Reserved—No method assigned.
162 non-ASCII byte (character unassigned)Reserved—No method assigned.
163 non-ASCII byte (character unassigned)Reserved—No method assigned.
164 non-ASCII byte (character unassigned)Reserved—No method assigned.
165 non-ASCII byte (character unassigned)Reserved—No method assigned.
166 non-ASCII byte (character unassigned)Reserved—No method assigned.
167 non-ASCII byte (character unassigned)Reserved—No method assigned.
168 non-ASCII byte (character unassigned)Reserved—No method assigned.
169 non-ASCII byte (character unassigned)Reserved—No method assigned.
170 non-ASCII byte (character unassigned)Reserved—No method assigned.
171 non-ASCII byte (character unassigned)Reserved—No method assigned.
172 non-ASCII byte (character unassigned)Reserved—No method assigned.
173 non-ASCII byte (character unassigned)Reserved—No method assigned.
174 non-ASCII byte (character unassigned)Reserved—No method assigned.
175 non-ASCII byte (character unassigned)Reserved—No method assigned.
176 non-ASCII byte (character unassigned)Reserved—No method assigned.
177 non-ASCII byte (character unassigned)Reserved—No method assigned.
178 non-ASCII byte (character unassigned)Reserved—No method assigned.
179 non-ASCII byte (character unassigned)Reserved—No method assigned.
180 non-ASCII byte (character unassigned)Reserved—No method assigned.
181 non-ASCII byte (character unassigned)Reserved—No method assigned.
182 non-ASCII byte (character unassigned)Reserved—No method assigned.
183 non-ASCII byte (character unassigned)Reserved—No method assigned.
184 non-ASCII byte (character unassigned)Reserved—No method assigned.
185 non-ASCII byte (character unassigned)Reserved—No method assigned.
186 non-ASCII byte (character unassigned)Reserved—No method assigned.
187 non-ASCII byte (character unassigned)Reserved—No method assigned.
188 non-ASCII byte (character unassigned)Reserved—No method assigned.
189 non-ASCII byte (character unassigned)Reserved—No method assigned.
190 non-ASCII byte (character unassigned)Reserved—No method assigned.
191 non-ASCII byte (character unassigned)Reserved—No method assigned.
192 non-ASCII byte (character unassigned)Reserved—No method assigned.
193 non-ASCII byte (character unassigned)Reserved—No method assigned.
194 non-ASCII byte (character unassigned)Reserved—No method assigned.
195 non-ASCII byte (character unassigned)Reserved—No method assigned.
196 non-ASCII byte (character unassigned)Reserved—No method assigned.
197 non-ASCII byte (character unassigned)Reserved—No method assigned.
198 non-ASCII byte (character unassigned)Reserved—No method assigned.
199 non-ASCII byte (character unassigned)Reserved—No method assigned.
200 non-ASCII byte (character unassigned)Reserved—No method assigned.
201 non-ASCII byte (character unassigned)Reserved—No method assigned.
202 non-ASCII byte (character unassigned)Reserved—No method assigned.
203 non-ASCII byte (character unassigned)Reserved—No method assigned.
204 non-ASCII byte (character unassigned)Reserved—No method assigned.
205 non-ASCII byte (character unassigned)Reserved—No method assigned.
206 non-ASCII byte (character unassigned)Reserved—No method assigned.
207 non-ASCII byte (character unassigned)Reserved—No method assigned.
208 non-ASCII byte (character unassigned)Reserved—No method assigned.
209 non-ASCII byte (character unassigned)Reserved—No method assigned.
210 non-ASCII byte (character unassigned)Reserved—No method assigned.
211 non-ASCII byte (character unassigned)Reserved—No method assigned.
212 non-ASCII byte (character unassigned)Reserved—No method assigned.
213 non-ASCII byte (character unassigned)Reserved—No method assigned.
214 non-ASCII byte (character unassigned)Reserved—No method assigned.
215 non-ASCII byte (character unassigned)Reserved—No method assigned.
216 non-ASCII byte (character unassigned)Reserved—No method assigned.
217 non-ASCII byte (character unassigned)Reserved—No method assigned.
218 non-ASCII byte (character unassigned)Reserved—No method assigned.
219 non-ASCII byte (character unassigned)Reserved—No method assigned.
220 non-ASCII byte (character unassigned)Reserved—No method assigned.
221 non-ASCII byte (character unassigned)Reserved—No method assigned.
222 non-ASCII byte (character unassigned)Reserved—No method assigned.
223 non-ASCII byte (character unassigned)Reserved—No method assigned.
224 non-ASCII byte (character unassigned)Reserved—No method assigned.
225 non-ASCII byte (character unassigned)Reserved—No method assigned.
226 non-ASCII byte (character unassigned)Reserved—No method assigned.
227 non-ASCII byte (character unassigned)Reserved—No method assigned.
228 non-ASCII byte (character unassigned)Reserved—No method assigned.
229 non-ASCII byte (character unassigned)Reserved—No method assigned.
230 non-ASCII byte (character unassigned)Reserved—No method assigned.
231 non-ASCII byte (character unassigned)Reserved—No method assigned.
232 non-ASCII byte (character unassigned)Reserved—No method assigned.
233 non-ASCII byte (character unassigned)Reserved—No method assigned.
234 non-ASCII byte (character unassigned)Reserved—No method assigned.
235 non-ASCII byte (character unassigned)Reserved—No method assigned.
236 non-ASCII byte (character unassigned)Reserved—No method assigned.
237 non-ASCII byte (character unassigned)Reserved—No method assigned.
238 non-ASCII byte (character unassigned)Reserved—No method assigned.
239 non-ASCII byte (character unassigned)Reserved—No method assigned.
240 non-ASCII byte (character unassigned)Reserved—No method assigned.
241 non-ASCII byte (character unassigned)Reserved—No method assigned.
242 non-ASCII byte (character unassigned)Reserved—No method assigned.
243 non-ASCII byte (character unassigned)Reserved—No method assigned.
244 non-ASCII byte (character unassigned)Reserved—No method assigned.
245 non-ASCII byte (character unassigned)Reserved—No method assigned.
246 non-ASCII byte (character unassigned)Reserved—No method assigned.
247 non-ASCII byte (character unassigned)Reserved—No method assigned.
248 non-ASCII byte (character unassigned)Reserved—No method assigned.
249 non-ASCII byte (character unassigned)Reserved—No method assigned.
250 non-ASCII byte (character unassigned)Reserved—No method assigned.
251 non-ASCII byte (character unassigned)Reserved—No method assigned.
252 non-ASCII byte (character unassigned)Reserved—No method assigned.
253 non-ASCII byte (character unassigned)Reserved—No method assigned.
254 non-ASCII byte (character unassigned)Reserved—No method assigned.
255 non-ASCII byte (character unassigned)Reserved—No method assigned.

Capsule standardization candidate: 61 retained slash-command definitions plus Research, Reproduce and Synthesize. The other 23 are excluded from this map. Original source files, the 61-method baseline and earlier tables remain intact. Byte assignments are provisional; model-token counts are not yet measured. Historical methods remain subject to current scope and authorization.